University of Tennessee at Chattanooga
  Engineering Laboratories on the Web
Developed with and using LabVIEW and NI-PCI DAQ from 
  Sine Input Duct Cooling Station
Enter this Information about you:      
  Name
  Location
  E-mail address

     
Enter these Parameters for the Experiment:        
  System:
Duct Cooling
  Amplitude of Sine wave (%):

  Baseline input value (%):

  Frequency of Sine wave (cycles/min):

  Length of experiment (min):

     
Enter this Configuration Information:

TEMPERATURE COOLING HELP

  Lower Heater
0=OFF, 1=ON

  Upper Heater
0=OFF, 1=ON
  Measurement Point
1=Middle, 2=Outlet

Damper #1 -- Open for (min) 
then closed for

               then open again (and repeating)

   

   

 


Copyright 1996-2012 Jim Henry
Last updated 21 January 2012
Feedback welcome & invited to
Send E-Mail to Lab-Master