University of Tennessee at Chattanooga
  Engineering Laboratories on the Web
Developed with and using LabVIEW and NI-PCI DAQ from 
Clamped Proportional Feedback Cooling Station
Enter this Information about you:      
  Name
  Location
  E-mail address

     
Enter these Parameters for the Experiment:        
  Length of experiment (min):

  Controller output bias value (%):
(=Baseline input value (%))

Controller tuning parameter and Set Point

 Proportional controller gain, Kc (%/cm-H2O):

Lab Wizard

 Set-point value (cm-H2O):

Lab Wizard
Controller Output Clamping Specifications
  Floor (%):

  Ceiling (%):

Enter this Configuration Information:

TEMPERATURE COOLING HELP

  Lower Heater
0=OFF, 1=ON

  Upper Heater
0=OFF, 1=ON
  Measurement Point
1=Middle, 2=Outlet

Damper #1 -- Open for (min) 
then closed for

               then open again (and repeating)

   

Damper #2 -- Open for (min) 
then closed for

               then open again (and repeating)

   

 


Copyright 1996-2012 Jim Henry
Last updated 8 January 2013
Feedback welcome & invited to
Send E-Mail to Lab-Master