University of Tennessee at Chattanooga
  Engineering Laboratories on the Web
Developed with and using LabVIEW and NI-PCI DAQ from 

  Constant Input

Temperature Cooling  Station

Enter this Information about you:

     

  Name
  Your location
  E-mail address

   

 

Enter these Parameters for the Experiment:

       

  Length of experiment (min):

[max of 10 min per run]
  Constant input value (%):

   

 

Enter this Configuration Information:

TEMPERATURE COOLING HELP

  Lower Heater
0=OFF, 1=ON

  Upper Heater
0=OFF, 1=ON
  Measurement Point
1=Middle, 2=Outlet

Damper #1 -- Open for (min) 
then closed for

               then open again (and repeating)

   

   

 


Copyright 1996-2012 Jim Henry
Last updated 21 January 2012
Feedback welcome & invited to
Send E-Mail to Lab-Master