University of Tennessee at Chattanooga
  Engineering Laboratories on the Web
Developed with and using LabVIEW and NI-PCI DAQ from 
  Proportional-Integral Feedback Cooling Station
Enter this Information about you:      
  Name
  Location
  E-mail address

     
Enter these Parameters for the Experiment:        
  Length of experiment (min):

Controller Tuning Parameters
  Proportional-Integral controller gain, Kc (%/deg-C):
MUST BE NEGATIVE
  Controller integral time (TauI) (min):

Set-point Specifications
  Initial set-point value (deg-C):

  Change of set-point value (deg-C):

  Time of change of set-point (min):

     
Enter this Configuration Information:

TEMPERATURE COOLING HELP

  Lower Heater
0=OFF, 1=ON

  Upper Heater
0=OFF, 1=ON
  Measurement Point
1=Middle, 2=Outlet

Damper #1 -- Open for (min) 
then closed for

               then open again (and repeating)

   

 


Copyright 1996-2012 Jim Henry
Last updated 10 February 2012
Feedback welcome & invited to
Send E-Mail to Lab-Master